LC-1 is wired remote controller with DIN connector, suitable for Atmos fog machine (AF-900(S)/1200(S)/1700(S)) & Fog Myth fog machine (FM-900/1200/1800). Once the fog machine is plugged the red led on this remote controller will light up. When fog machine has reached operating temperature the green led lights up indicating that the fog machined is ready for emission by pressing the orange button. The green led is off cycles (about 1-2 minutes), and turns on when the fog machine becomes workable.

Specifications

Further Information

print

User Manual

LC-1X is wired remote controller with XLR connector, suitable for GT-1000 & CF-1500. Once the fog machine is plugged the red led on this remote controller will light up. When fog machine has reached operating temperature the green led lights up indicating that the fog machined is ready for emission by pressing the orange button. The green led is off cycles (about 1-2 minutes), and turns on when the fog machine becomes workable.

Specifications

Key To Symbols

More information

Further Information

print

User Manual

LC-2S is wired remote controller with JY connector, suitable for Atmos fog machine (AF-800/800S) & Fog Myth fog machine (FM-800). Once the fog machine is plugged the red led on this remote controller will light up. When fog machine has reached operating temperature the green led lights up indicating that the fog machined is ready for emission by pressing the orange button. The green led is off cycles (about 1-2 minutes), and turns on when the fog machine becomes workable.

Specifications

Further Information

print

User Manual

LC-2X is wired remote controller with JY connector, suitable for Deo fog machine (DEO-400(S)/DEO-800(S)) & Gusto small fog machine (GT-400/GT-800). Once the fog machine is plugged the red led on this remote controller will light up. When fog machine has reached operating temperature the green led lights up indicating that the fog machined is ready for emission by pressing the orange button. The green led is off cycles (about 1-2 minutes), and turns on when the fog machine becomes workable.

Specifications

Further Information

print

User Manual

The Bubble Master BB-100 is designed with 8m wired remote controller with JY cable. Once the bubble machine is plugged, the red LED on this remote controller will light up. When switch the button (B) ON, the green LED lights up, and indicating the bubble machine blows volumes of bubbles to the air.

Specifications

Further Information

print

User Manual

The Bubble Master BB-100 is designed with 8m wired remote controller with JY cable. Once the bubble machine is plugged, the red LED on this remote controller will light up. When switch the button (B) ON, the green LED lights up, and indicating the bubble machine blows volumes of bubbles to the air.

Specifications

Further Information

print

User Manual

The fog machine AF-1700DX/AF-1700SDX is designed with 8m wired remote controller with 5pin XLR cable. Once the fog machine is plugged, the red LED on this remote controller will light up. When fog machine has reached operating temperature, the green LED lights up, and indicating the fog machine has ready for emission by pressing the orange button. The green LED is off for about 8 minutes during fog machine warm-up and re-heating cycles (about 80 seconds), and turns on when the fog machine becomes workable.

Specifications

Further Information

print

User Manual