分类目录归档:News

Porter Faze 3.0C (FZ-3.0C)

FZ-3.0C-view.jpg FZ-3(120V)a.jpg

Features

  • Smooth and stable smoke output control from 5-100%. In accordance with different wind power, the smoke can be adjusted from minimum to 100%. Suitable for operation in any locations.
  • 5-100% fan speed adjustment. Quiet and smooth fan let the smoke disperse unknowingly. 100% high fan speed let the smoke be thin and even, and expand more quickly throughout the location.
  • Primary heating up takes very short time, only about 45 seconds, shorter than general faze machines.
  • The machine can be installed for up spray or side spray.
  • Unique design of 5.6-liter liquid tank let FZ-3.0C have no worry of oil leaking when being operated up spray or side spray. Quick connector makes replacement direct and easier when performance is ongoing.
  • DMX on board, 3 DMX modes for choice; 1CH, 2CH, 4CH, operate by any additional DMX controller.
  • Built-in multi-function operation control. Built-In timer control, manual fogging control and continuous fogging control.
  • FZ-3.0C is equipped with 0~45 degree adjustable air deflector.
  • Heavy-duty. Able to keep working long time.
  • Self-cleaning function: The machine design of machine stops working after a delay of 30 seconds, automatically clear the tubing of the remaining liquid.
  • Design of expediting liquid supply: When low smoke output, it takes more time for supplying the liquid for the first time. The function of manual fogging is suggested to be used for expediting liquid supply and save time.
  • Easy understanding blue LCD screen and intelligent design of software control.
  • Flight case designed with thick and excellent material. Liquid tank designed for quick fixing and with protection against getting loosen during transportation. All details are required.
  • Can be connected with additional DMX wifi module.

>>> Read More

Porter Faze 3.0 (FZ-3.0)

FZ-3.0 FZ-3.0

Features

  • Smooth and stable smoke output control from 5-100%.  In accordance with different wind power, the smoke can be adjusted from minimum to 100%.  Suitable for operation in any locations.
  • 5-100% fan speed adjustment. Quiet and smooth fan let the smoke disperse unknowingly. 100% high fan speed let the smoke be thin and even, and expand more quickly throughout the location.
  • Primary heating up takes very short time, only about 45 seconds, shorter than general faze machines.
  • The machine can be installed for up spray or forward spray.
  • Unique design of 5.6 liter liquid tank let FZ-3.0 have no worry of oil leaking when being operated up spray or side spray. Quick connector makes replacement direct and easier when performance is ongoing.
  • DMX on board, 3 DMX modes for choice; 1CH, 2CH, 4CH, operate by any additional DMX controller.
  • Multi-function operation control. Built-In timer control, manual fogging control and continuous fogging control.
  • Heavy-duty.  Able to keep working long time.
  • Self-cleaning function: The machine design of machine stops working after a delay of 30 seconds, automatically clear the tubing of the remaining liquid.
  • Design of expediting liquid supply: When low smoke output, it takes more time for supplying the liquid for the first time. The function of manual fogging is suggested to be used for expediting liquid supply and save time.
  • Easy understanding LCD display and intelligent design of software control.
  • Rugged high-quality shape designed with strong bracket. Liquid tank designed for quick fixing and with protection against getting loosen during transportation. All details are required.

>>> Read More

DJ Faze 2.0 (FZ-2.0)

FZ-2.0 FZ-2.0

Features

  • Smooth and stable smoke output control from 5-100%.  In accordance with different wind power, the smoke can be adjusted from minimum to 100%.  Suitable for operation in any locations.
  • 5-100% fan speed adjustment. Quiet and smooth fan let the smoke disperse unknowingly. 100% high fan speed let the smoke be thin and even, and expand more quickly throughout the location.
  • Primary heating up takes very short time, only about 75 seconds, shorter than general faze machines.
  • DMX on board, 2 CH DMX, operate by any additional DMX controller.
  • Multi-function operation control. Built-In timer control, manual fogging control and continuous fogging control.
  • FZ-2.0 is equipped with adjustable smoke vent.
  • Self-cleaning function: The machine design of machine stops working after a delay of 30 seconds, automatically clear the tubing of the remaining liquid.
  • Design of expediting liquid supply: When low smoke output, it takes more time for supplying the liquid for the first time. The function of manual fogging is suggested to be used for expediting liquid supply and save time.
  • Easy understanding LED display and intelligent design of software control.
  • Heavy-duty.  Able to keep working long time.

>>> Read More

ATMOS FOG (AF-1000)

The Atmos 1000 is a 650W compact, high output fog machine with new advances in technology. It has a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance pump system for optimum output.

The Atmos 1000 also has convenient features such as a visible fog fluid level built-in to the rear of the unit to see how much fluid is in the tank, and a LED heating indicator system that changes colors depending on whether the fogger is heating up or ready to use.

>>> Read More

FAZE 1.0 (FZ-1.0)

FAZE 1.0 is high efficiency of heating. It is compact for easy movement. It can make volumes of harmless and dry haze that is perfectly suitable for matching with any kind of traditional lightings, LED lightings and Lasers in any performance.

FAZE 1.0 is equipped with 0~45 degree adjustable smoke vent, die-cut heating module, quiet fan and big liquid tank. The heating module of high efficiency allows FAZE 1.0 to make volumes of haze in a short time and to disperse the haze evenly in the whole space. When detected low liquid by the patented sensor device, power cutting functions automatically to prevent interior spare parts from damage. The fan is quiet and effective. The dry and long lasting haze effect makes FAZE 1.0 excellent for matching with any kinds of lightings. TC-4 timer controller is further options to elevate the utility of FAZE 1.0.

>>> Read More

MARS DMX Fog Machines (MX-3000DX)

MARS DMX Fog Machines provide superior performance due to:

  • Built-in function of timing control allows easy timing control volume, interval, and duration through by LED display.
  • Humanized warning function for abnormal status: In case the fogger has any abnormal functioning, the LED display on the back panel and status of tank will be indicating abnormal status as warning to let the user be aware of the problematic situation in time.
  • Aluminum die-cast design functioned with high-effective heating module prevents clogging. Unique design that can be earthed directly without affecting normal working of the thermo system and DMX control circuit. There won’t be danger of accidental human body’s electric shock.
  • Advanced oil-level sensor detects shortage of oil and warns the pump to cut the oil supply automatically.
  • DMX on board, operate by any additional DMX controller.
  • Manual fogging can be operated directly from the back panel of the machine. Manual fogging is prior to other fogging operations of the easy controller & built-in timing function.
  • High output fog machine, approx. 40000 cu.ft/min output.
  • Electronic Thermo Sensing (ETS) – electronic heater stay hot at all times between fog blasts.
  • Direct thermal protection.
  • Master / Slave mode can be operated either by the built-in timing control or by outside connected controller. Simple and humanized design makes the fogger easier for use.

>> Read More

MARS Professional DMX Fog Machine Series

All deliberate designs have accomplished MARS as products of preeminence.

MARS series, DMX digital foggers, establish their eminence in the market with unique innovation and professional technique. Thanks to their high security and easy maintenance, MARS series are perfectly adapted for locations of professional performance. There are our optional models:MX-1000MX-1250MX-1500MX-1800 and MX-3500, with the following five characteristics:

Easy Maintenance

The entire machine is assembled with a heat module, a pump module and a circuit module. The innovative design completely solves the problem that the circuit and other parts interfere with one another while dismantling for update, maintenance or repair. Each of the three modules is independent, and does not affect the others, and that is what makes the maintenance so direct and easy. At the same time, you can easily disassemble the lateral sides to take out the broken heating module or the pump module, or the rear side to replace the circuit module. Such intelligent and ideal design makes the maintenance most humanized and simple.

Security

The one-piece die-cast heating module is perfectly covered and sealed with iron shell. Even under such circumstances as the fixture is over heating or the secure parts is out of control, no hazard will happen. Furthermore, the patented oil-level sensor detects shortage of oil and warns the pump to cut oil supply automatically so as to prevent from damaging or accidentally firing.

High Efficiency

The one-piece die-cast heating module fastens heat transmission and therefore, shortens the heating cycle. The break-through design of double heating pipes for MX-1800 & MX-3500 even enhances significantly the heating efficiency.

Economical Power Consumption

Power-saving device enables MX-1800 and MX-3500 to cut automatically power consumption during stand-by, which impressively realizes power saving up to 50%.

Convenience

MARS is a series of DMX digital foggers which can be conveniently connected with other Foggers and DMX stage equipment for operation. Besides, the series can be operated by exteriorly connected controllers (e.g. TC-3X or MD-3) to control fogging time and volume or Master/Salve operation. Our high-quality fog liquid is a perfect match for the series to maximize the fogging effect.

Wireless DMX module(WD-1)

Wireless DMX module(WD-1) is a combination product of DMX transmitter, receiver and booster. With WD-1, no more need of DMX signals for DMX equipment. Just simple installation is needed to establish a stable wireless DMX environment, and get the DMX equipment easy to be used. WD-1 can be a wireless transmitter connected to any DMX console and transmit wireless DMX signals. It also can be DMX receiver connected to any DMX control equipment. When DMX signal is too weak or unstable, WD-1 can be used as a booster to strengthen and stabilize the signals. Simple adjustment of the dip switch can switch these three functions. More cheerful thing is its competitive price. All DMX signal users can get easy wireless DMX environment with an easy way.

>> Read More

8-Light LED DJ Sequencer

8-LED-Light DJ Sequencer

The 8-LED-Light DJ Sequencer is made specially for mobil DJ. Its two separate halves allow to be positioned up to 2 meters apart, and are perfect for each side of your DJ rig. Assembled the two halves, the unit becomes a portable case, easy to be installed and moved on the scene.

8-LED-Light DJ Sequencer is audio control or automatic for performing 11 colorful built-in programs including 6 chasers, 4 flashings and 1 mixed pattern. Speed of the built-in programs can be adjusted under automatic mode.

>> Read More

Let’s Party

Let’s Party

Small but splendid LED effects,Radiance, Star Light & Shimmer, are the best assembly for the party. Shinning Radiance creates colorful vision effect and animates atmosphere of the party. Sparkling Star Light replace completely the traditional effect of mirror ball appropriately moving or quieting the party. Shimmer with simple and sharp beams can be coordinated with 4-channel chaser as the most splendid back light of the party. With such powerful LED effects assembly, let’s wait no more and get the passionate party started.

(Read more about RA-3AX,RA-3,SL-3A,SL-3,SH-3A,SH-3).

EXPLO(UHF) DMX Strobes

EXPLO ultrahigh frequency (UHF) DMX strobe series
Revolutionary Explosion

EXPLO DMX Blinder-effect strobe series includes two models, EX-1250D and EX-2500D. Besides all the advantages that traditional strobes posses, EXPLO DMX strobes are characterized with stunning blinder-effect of ultrahigh frequency, which elevates the application technology of strobes to a higher level of efficiency.

EXPLO DMX Ultrahigh Frequency strobes function 4 DMX channels (can be also set as three-channel strobes). Can be connected with DMX controller to control 5 modes: Sound Active, Single Flash, Four Flashes, Blinder-effect, & Blinder-effect with fade-out. Under Sound Active, synchronous patterns or asynchronous patterns are selectable. Asynchronous patterns present 9 selectable combinations with dimmer function. Precisely coordinated with different kinds of music, all built-in pattern combinations perform sensitively and actively. Under Single Flash and Four Flashes modes, 0.5 – 25Hz flashing speed and 0-100% brightness can be adjusted to present traditional flashing functions. Under Blinder-effect and Blinder-effect with fade out modes, blinder effect can be circled and Blinder-effect interval as well as 0-100% dimmer can be adjusted. Blinder-effect makes shocking effects.

The unique SLAVE OUT function makes the concept of one light convert to the concept of one set of lights. Not only can be connected with several equipments of DMX signal, but also can do MASTER/SLAVE at the same time accepting DMX control. Coordinated with the forth channel function, it is allowed to do easy programming of one’s own patterns, and the selected salve units also can accept DMX control. The ingenious software/hardware design makes use of EXPLO DMX easier and more humanized.

EXPLO DMX is equipped with long-life I type xenon lamp. Its color temperature reaches 5600K clean white. Tempered glass cover, solid hanging handle, easy replacement of lamp tube and outer shell of excellent heat dissipation accomplish EXPLO DMX ultrahigh frequency strobe series as your best choice.

Rainbow Bean DMX LED Effect Lighting (RB-7DX)

Rainbow Beam DMX LED is effect light of 4 DMX channels, which can be connected with DMX controller to control 4 modes, Mix Auto, Macro Edit, Sound Active for single show and Sound Active for mix show. Under Mix Auto mode, the unit can automatically run built-in patterns without music in accordance with adjustable speed. Under Macro Edit mode: 39 scenes are available for being made different combinations, and functions such as blackout, speedy flash and full light can be coordinated together for easily editing lighting shows of own favorite. Under Sound Active mode: Single show or mix show is selectable.

RB-7DX.jpg RB-7DX.jpg

>>Read More